CONTROL MENU

You can do the control by the following menu buttons:

  • Information for main features and help
  • Refresh a menu
  • Back to Layout view
  • Enable night mode
  • Disable night mode
  • Activate Face or Motion detection
  • Deactivate Face or Motion detection
  • Record video feeds to Camera Roll in your Photo Albums
  • Record Off
  • Horizontal patrol
  • Vertical patrol
  • Pan Tilt controls up to 8 directions (if applicable)
  • ~ Home or max 8 predefined positions
  • Next camera screen
  • Previous camera screen
  • Saves the images into your device’s photo Albums
  • How to Pinch-to-Zoom in/out

    (Image courtesy of gestureworks.com)

    With multi-touch, you can place two fingers on the screen and squeeze them together to make the item you’re viewing smaller, or pull them apart to make it bigger. That’s where you hold one finger on the screen and move it around, causing the screen under your finger to scroll to navigate the spot you desire.

How to Setup

Please refer to the screenshot below to get a better understanding of how to select a camera model in your setup screen. We will take you through the step by step procedure on installing the app in case you have the WVC210 IP camera.

1. Tap on Add Camera

2. Camera name: Enter the name you want to assign to the camera

3. Username: Enter the Username of the camera (case sensitive)

4. Password: Enter the Password of the camera (case sensitive)

5. Select a Camera Model: Linksys -> Common by a picker then back to Setup screen

Setup Screen Shots

6. IP or DDNS: Enter IP address or DDNS URL without “http://"

7. Port: Enter the Port number on which the camera is installed

8. Function Setup: toggle Resolution, Upside Down, Invert Pan Tilt options ON/OFF etc.

9. Tap on Save button